Although many people who own homes now a day, no matter where they’re located in the world, have moved away from bathtubs in preference for showers, don’t let this trend deter you.
Despite this trend in moving away from bathtubs in preference for showers, many people worldwide who own homes still have bathtubs and use them to take baths.
In addition, sometimes people take showers in the bathrooms in their homes but do so with a shower head placed over their bathtub.
Therefore, when these people take showers in the bathrooms in their homes but do so with a shower head placed over their bathtub, they still need to use their bathtubs to get clean after a long day.
The Frustrating Problem of a Bathtub That Won’t Hold Water
As you can see, bathtubs are essential facilities to have in your bathroom in your home. So when your bathtub doesn’t hold water and you have plumbing problems, this becomes a huge problem.
After all, no one likes having hot water spill all over their tub and dampen their bathroom floor.
The common problem of a tub that won’t hold water
One common plumbing problem that many people all over the world throughout history have had to go through is when their bathtub won’t hold water.
So, why won’t your bathtub hold water?
If you’re like many people all over the world throughout history who have had to go through when their bathtub doesn’t hold water, rest assured that you’re not alone.
Therefore, If you’re like those people, you have many options available to fix your bathroom and enjoy a hot bath once more.
Here is an article about why your tub won’t hold water and what you can do about it.
Why Won’t a Bathtub Hold Water?
Although it’s a fact that many people all over the world throughout history have had to go through when their bathtub doesn’t hold water, there are many different reasons why a tub won’t hold water.
Here are a few possible reasons why a tub won’t hold water. As well, here are some ways how to fix a tub that won’t hold water.
A Faulty Bathtub Drain Stopper
One of the main reasons why a bathtub won’t hold water could be that your bathtub drain stopper is faulty.
What Is a Bathtub Drain Stopper and How To Use It??
First off, you should know what a bathtub drain stopper is. A bathtub drain stopper is a type of tool that is used with a bathtub, and most bathtubs have a tub drain. This tub drain is where water drains when it’s not required to be inside the tub.
However, when you need water to be held inside your bathtub, say, you need to cover this drain hole. You can do that with a bathtub stopper.
This is a step-by-step guide on how to use a bathtub drain stopper. It’s easy to learn how to use a drain plug.
- Locate your bathtub drains
The first step in this guide on how to use a bathtub drain stopper is to locate your bathtub drain. Most bathtubs have their bathtub train located in the middle front of their bathtub.
- Insert your bathtub stopper into your bathtub drain hole
The second step in this guide on using a bathtub drain stopper is to insert your bathtub stopper into your drain hole.
To do this, put your tub stopper on top of the drain hole of your bath tub. After this, push your tub plug down firmly so that it fits inside the drain hole of your bathtub.
Ensure that your plug is correctly adjusted so that no water will drain from your tub while your plug is inserted in the drain opening of your tub.
- Remove your stopper from your drain
Once you have finished with the water you need in your tub, you should drain the water from your tub for whatever purpose. The best way to do this is with your tub plug.
You need to remove your drain stopper to drain the water from your tub. You must pull your tub plug with a soft lift and turn motion to remove your drain stopper. When you remove the top plug, water will go through a slowly draining process.
Stopper Problems
When your tub plug becomes the problem
If you’re suffering from a bathtub that won’t hold water, then it could be from the fact that your stopper isn’t working as it should.
Why is your stopper not working?
One of the main reasons your stopper isn’t working could be that it’s not the right shape for your drain. If it’s a new stopper and water is leaking down the pipes, then this means that your stopper isn’t the right size.
A stopper is supposed to have a water-tight seal on your drain. Therefore, if it’s a new stopper and water is leaking down the pipes, then this means that your stopper is too small.
If it’s an old stopper and water is dripping down the pipes, then this means that your stopper has become too old to use and is damaged. Everyone should know that stoppers can change and deteriorate over time through constant usage.
Alternatively, the problem of your bathtub not holding water could be from an ineffective trip lever drain stopper. A trip lever drain stopper is different than a regular stopper as it’s a lever.
This lever works by being placed above the bottom part of your tub controls. When this trip lever is pushed down, the lever allows water to drain.
How To Fix a Stopper-Related Problem?
Luckily for you, it’s easy to fix a stopper-related problem. The only tool you need is money because the only way you can fix a stopper-related problem is to replace the old one with a new stopper.
A new stopper isn’t expensive. As well, it’s easy to find a new stopper. You can easily buy a new stopper at a reasonable price at a hardware store or online.
Clogged Pipes
Let it be known that metal pipes, such as those you probably have in your home, can experience severe damage over time.
For instance, without proper cleaning that’s done regularly, pipes tend to react harshly to strong water pressure, even when you think you’re using just enough water to get your job done, whatever that job may be.
Why Do Pipes Clog and How To Fix Them?
A clog builds for a variety of reasons. For instance, an object like a razor cover might clog your drain. Over time, old pipes may become clogged by mineral deposits or soap scum.
The best way to fix blocked pipes is to undergo drain cleaning. Drain cleaning will significantly approve the functioning of your bathroom’s pipes. There are two ways that you can do this.
Hire a Plumber
The best way to clean your pipes is by hiring a plumber. A plumber is a professional who knows how to repair damages in the right way. This professional service will fix any issues you have.
These professionals are educated and know everything that there is to know about many things, such as the functioning of linkage assembly.
They need to know how to use a lock nut, what is the u-shaped pin, the importance of every magnetic tool they own and use, how to go around a cover plate with a magnetic tool so that the cover plate can work optimally, and so on.
Adding on, a professional can also fix any issues you may have with your overflow tube or your overflow drain. By the way, your overflow tube is the small hole in any water holding facility where the water goes when it’s dangerously close to spilling over the edge.
Alternate Route
Suppose you don’t want to hire a professional plumber for your plumbing problems. In that case, you could go for the temporary solution of taking the alternate route of cleaning everything by yourself.
For instance, use baking soda to remove any plumbing-related mess.
However, this easily adjusted method to go about your plumbing issues involves a lot of pull and pushing action, the need to constantly lift and turn things, and a lot of trash in a plastic bag by the end of it.
Conclusion
To finish off, rest assured that you’re not alone if you suffer from this common plumbing issue. However, once diagnosing the main culprit of this plumbing issue, you can quickly fix it.